TY - JOUR
T1 - Transient growth of perturbations in a vortex column
AU - Pradeep, D. S.
AU - Hussain, F.
N1 - Copyright:
Copyright 2022 Elsevier B.V., All rights reserved.
PY - 2006/3
Y1 - 2006/3
N2 - Linear transient growth in a normal-mode-stable vortex column is studied by extracting 'optimal modes' of perturbations. Amplifications occur over a wide range of azimuthal wavenumbers m and axial wavenumbers k, and can be more than three orders of magnitude even at moderate vortex Reynolds numbers Re (checked up axisymmetric (104) Transient growth is unbounded in the inviscid limit. For given Re and k axisymmetric (m=0) modes undergo the largest volume-integrated energy growth, whereas maximum core energy growth occurs for bending waves ( m = 1). At fixed m and Re, growth decreases with increasing k, due to the damping effect of viscosity. At fixed m and k, growth increases rapidly with Re - pointing to the significance of transient growth in high-practical flows, such as the trailing vortex. Inviscid effects not only cause transient growth, but also its subsequent arrest. There are two distinct mechanisms for growth. First, two-dimensional perturbations amplify because the streamlines have 'positive tilt' contributing uv > 0 stress necessary for growth; here u and v are the radial and azimuthal velocity perturbations, respectively. Second, three-dimensional perturbations grow through azimuthal stretching of spiral vortex filaments containing radial vorticity. Decay in both cases is due to the differential advection - of axial vorticity by the mean swirl - transforming the perturbation streamlines to predominantly 'negative tilt', producing uv < 0 stress. The transient growth mechanism is explained in terms of the distinct effects of the strain and vorticity components of the mean flow, which play counteractive roles. While strain amplifies energy, vorticity limits transient growth by inducing wave motions, in which radial vorticity is depleted by vortex line coiling, i.e. by the tilting of radial vorticity into axial and azimuthal components. Since the strain-to-vorticity ratio varies with radius in the vortex, the competition between strain and vorticity selects a preferred radius of localization of an 'optimal perturbation'. With increasing growth, axisymmetric optimal modes are localized at progressively larger radii and their growth rates progressively diminished - both limiting the physical significance of such modes in high-Re practical flows. An optimal bending wave, on the other hand, is localized closer to the vortex column, where a vorticity perturbation external to the core can resonantly excite vortex core waves. This leads to substantial growth of core fluctuation energy and, probably, to core transition to turbulence. Such resonant growth may be the mechanism for the appearance of bending waves in a vortex in a turbulent field.
AB - Linear transient growth in a normal-mode-stable vortex column is studied by extracting 'optimal modes' of perturbations. Amplifications occur over a wide range of azimuthal wavenumbers m and axial wavenumbers k, and can be more than three orders of magnitude even at moderate vortex Reynolds numbers Re (checked up axisymmetric (104) Transient growth is unbounded in the inviscid limit. For given Re and k axisymmetric (m=0) modes undergo the largest volume-integrated energy growth, whereas maximum core energy growth occurs for bending waves ( m = 1). At fixed m and Re, growth decreases with increasing k, due to the damping effect of viscosity. At fixed m and k, growth increases rapidly with Re - pointing to the significance of transient growth in high-practical flows, such as the trailing vortex. Inviscid effects not only cause transient growth, but also its subsequent arrest. There are two distinct mechanisms for growth. First, two-dimensional perturbations amplify because the streamlines have 'positive tilt' contributing uv > 0 stress necessary for growth; here u and v are the radial and azimuthal velocity perturbations, respectively. Second, three-dimensional perturbations grow through azimuthal stretching of spiral vortex filaments containing radial vorticity. Decay in both cases is due to the differential advection - of axial vorticity by the mean swirl - transforming the perturbation streamlines to predominantly 'negative tilt', producing uv < 0 stress. The transient growth mechanism is explained in terms of the distinct effects of the strain and vorticity components of the mean flow, which play counteractive roles. While strain amplifies energy, vorticity limits transient growth by inducing wave motions, in which radial vorticity is depleted by vortex line coiling, i.e. by the tilting of radial vorticity into axial and azimuthal components. Since the strain-to-vorticity ratio varies with radius in the vortex, the competition between strain and vorticity selects a preferred radius of localization of an 'optimal perturbation'. With increasing growth, axisymmetric optimal modes are localized at progressively larger radii and their growth rates progressively diminished - both limiting the physical significance of such modes in high-Re practical flows. An optimal bending wave, on the other hand, is localized closer to the vortex column, where a vorticity perturbation external to the core can resonantly excite vortex core waves. This leads to substantial growth of core fluctuation energy and, probably, to core transition to turbulence. Such resonant growth may be the mechanism for the appearance of bending waves in a vortex in a turbulent field.
UR - http://www.scopus.com/inward/record.url?scp=33645807194&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=33645807194&partnerID=8YFLogxK
U2 - 10.1017/S0022112005008207
DO - 10.1017/S0022112005008207
M3 - Article
AN - SCOPUS:33645807194
SN - 0022-1120
VL - 550
SP - 251
EP - 288
JO - Journal of Fluid Mechanics
JF - Journal of Fluid Mechanics
ER -